Start here
You may not know whether you need cleaning, honing, polishing or repair — but you know what you see. Tell us what it looks like and we’ll help you understand it, and whether it can be restored.
(252) 681-8499Dull? Cloudy? Etched? Stained? Scratched? Chipped? Send 3–5 photos and your location — we’ll help identify the likely problem and recommend the next step.
Problems we solve
The visitor rarely knows they need “honing,” “crystallization” or “resin repair.” You know what the stone looks like. Start there — each of these is a common, often-restorable problem.
Marble that has lost its shine, or stays hazy after cleaning, is usually surface wear, residue or lost polish — not damage you have to live with. It is one of the most restorable problems there is.
Dull marks, rings or water spots on marble and other acid-sensitive stone are often chemical etching from everyday acids — coffee, citrus, cleaners — not a stain. Etching is refinishable.
Discoloration that has penetrated into the stone is different from etching, and needs the right treatment for the material. Send a photo and we’ll tell you what we think it is.
Scratches can often be honed and polished out, depending on their depth and the stone. Many surfaces look far worse than they actually are once they’re refinished.
Chips and cracks can frequently be repaired rather than replaced, depending on the damage and the material. A photo tells us whether repair is realistic.
Travertine develops open pits and holes as old filler fails. Those holes can usually be filled and the surface refinished — travertine rarely needs replacing for this alone.
Stone that looks darker — especially in bathrooms and showers — can have several causes and should be diagnosed before treatment. Polishing does not solve a moisture problem, and we’ll tell you plainly if that’s what we suspect.
Entrances, lobbies and corridors lose their finish where feet fall most. Daily cleaning cannot bring that back — restoration can, and it can be scheduled around how the space is used.
Before you replace it
Replacing natural stone is expensive and often unnecessary. The right step depends on the stone and the problem:
Cleaning removes what sits on the surface. Honing evens and smooths it. Polishing and crystallization bring back the shine. Repair addresses chips and cracks. Sealing helps protect the result. We recommend only what your stone actually needs.
If a surface is genuinely beyond restoring, we’ll tell you plainly. New Galaxy Floor restores, repairs, polishes and maintains the stone you already own — we do not install replacement floors, so our recommendation is about your stone, not a sale.
Where these problems show up
Marble foyers, kitchen countertops, bathroom vanities and stone floors. Kitchen & bath restoration ›
Lobbies, entrances, corridors and elevator areas where cleaning can’t restore worn stone. Commercial restoration ›
For property and facility managers weighing restore, maintain or replace. For property managers ›
Our process
Show us the stone and the problem, and tell us where the property is located.
We tell you what we’re likely seeing — wear, etching, a stain, damage — and your options.
In person where needed, we confirm the stone and recommend the right process, with a test area where appropriate.
Honing, polishing, crystallization, filling and repair — matched to your stone, then sealed where appropriate.
Service area
Based in North Carolina and serving high-value homes and businesses across Virginia, Maryland and Washington, DC. Not sure whether we cover your area? Call and ask — we’re happy to let you know.
Marble & natural-stone polishing, restoration and countertop care for homes and businesses across North Carolina — also serving Virginia, Maryland & Washington, DC.
North Carolina — also serving Virginia, Maryland & Washington, DC
HomeStone ProblemsOur ServicesCommercialHealthcareProperty ManagersKitchen & BathOur WorkContact